Overnight, I found that the current mouse price is really cheap. For example, Logitech G102 and purgatory Viper can achieve a price of about 70 yuan, which is really cost-effective. The best way to buy a new mouse if it breaks down is to get on the “unlimited refill” car if you are lucky. But many people really don’t understand the fun of hands-on, spending a few dollars to repair the mouse is really super sense of accomplishment. This time a good friend of the basilis snake double-click, to the mouse for micro task I gladly accepted. < / P > < p > first of all, let’s introduce what kind of equipment you need to replace the mouse micro motion by yourself. Electric soldering iron, solder, hair dryer and screwdriver are used as tools. In addition, also need to buy their own mouse micro, basically a few dollars can buy a good mouse micro. < / P > < p > in fact, I gave the basilis snake to him. I didn’t expect to spend a year like this, especially the side is so dirty. It’s really cooked. Otherwise, I won’t do a hundred. < / P > < p > if you want to take it apart, the first step is, of course, to blow the hair out of the hair dryer, heat up the adhesive tape, and then remove it, because the screw used for fixing is hidden under the adhesive tape. < / P > < p > in addition to the screw under the adhesive, there is also a screw hidden under the sticker. The more violent method of disassembly is to find the position directly and poke it open with a screwdriver. However, as a perfectionist, it is better to heat the hair dryer and then remove it with a knife, so as not to damage the style of the back. < / P > < p > then unplug all the visible connecting wires from the socket. Just be careful when you unplug them. Of course, you don’t have to worry too much. After all, the products of big factories are not so delicate. < / P > < p > the next step is to remove the fretting. Before, some people said that we can spray some WD-40 on the fretting to solve the problem of connecting the machine, but others said that it is not a cure for the symptoms, and it won’t work after a period of time, so it’s better to replace the fretting honestly. When removing tin, in order to clean it, you can first fill some tin on the solder joint, so that the tin absorber can wash it more easily. < / P > < p > I have removed the mouse micro motion and the keyboard shaft. If I have removed the mouse micro motion, I will find that it is pediatrics to remove the mechanical keyboard micro motion. It takes many times to remove the fretting tin. As long as there is a little residual tin, the fretting tin can not be removed. < / P > < p > the original one is Omron’s green dot micro motion. In order to make the left and right keys feel similar, the two micro motions are removed. The price of Ma Yun’s family is about five yuan. < / P > < p > when I used to change the fretting of the purgatory viper, the Omron 20m I used to change was very crisp, so I bought it for less than two yuan. Maybe it was because of the batch. The fretting of this batch was obviously not as crisp as before. I regret that I didn’t buy more at that time. < / P > < p > there is still happiness in doing things by yourself, especially when things are repaired in your own hands. In fact, it’s very easy to repair the mouse with continuous strokes. If you move your hands, you can make it continue to fight. I think everyone should master micro motion skills, ha ha ha. Skip to content